Robot Club

User Tools

Site Tools

You are here: start » laserengraver » procedures » poweroff
laserengraver:procedures:poweroff

Procedure

Follow the steps below to turn the laser engraver off

  1. Verify that the key on the laser engraver is in the Off position

    Key in Off Position

  2. Turn off the laser power switch on the side of the machine

    Laser Power Button

  3. Turn off the water cooler power switch

    Water Cooler Power Button

  4. Turn off the air pump power switch on the side of the machine

    Air Pump Power Button

  5. Turn off the controller power switch on the side of the machine

    Controller Power Button

  6. Turn off the outlet strip behind the machine

    Power Strip

  7. Remove the key from the machine and return it to the cabinet
"Therefore, if anyone is in Christ, he is a new creation. The old has passed away; behold, the new has come. - 2 Corinthians 5:17"
laserengraver/procedures/poweroff.txt · Last modified: by jstruebel