Robot Club

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== WiFi Configuration Without Password ======

If your wireless network connection does not have a password then follow the steps below to configure the PiBot for connecting to it.

  - Plug the SD Card reader into the computer or unplug it and replug it
  - Open the VSCode from the Applications directory on the Flash drive
  - Create a new file by selecting File->New File from the menu at the top
  - Paste the following text into the new file\\ \\ <WRAP round important>Be sure to replace the text "Your network name/SSID" with the actual SSID for your wireless network. If your SSID includes spaces then you have to use " at the beginning and the end of it</WRAP> <WRAP round tip>If you are outside the United States then change the 'country=US' line to use the appropriate [[https://en.wikipedia.org/wiki/List_of_ISO_3166_country_codes|ISO 3166 alpha-2 country code]]</WRAP> <WRAP box><code>ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=US

network={
     ssid="Your network name/SSID"
     key_mgmt=NONE
}</code></WRAP>
  - Save the file by choosing File->Save As... from the menu at the top
    - In the "File name:" field type "wpa_supplicant.conf"
    - Browse to the "boot" drive. You may need to select "This PC" and then scroll down to find the "boot" drive\\ \\ <WRAP box>{{ :pibot:lesson1:softwarewin:wifi:s1.png |Saving wpa_supplicant.conf}}</WRAP>
  - Close the Visual Studio Code app
  - Eject the SD Card reader from the computer
  - Remove the SD Card reader from the computer