Differences

This shows you the differences between two versions of the page.

--- laserengraver:procedures:poweroff [2022/07/31 16:41] – created jstruebel
+++ laserengraver:procedures:poweroff [2023/10/08 13:38] (current) – jstruebel
@@ Line 1: / Line 1: @@
+====== Procedure ======
+Follow the steps below to turn the laser engraver off
+  - Verify that the key on the laser engraver is in the Off position\\ \\ <WRAP box>{{ :laserengraver:procedures:poweroff:key_off.png |Key in Off Position}}</WRAP>
+  - Turn off the laser power switch on the side of the machine\\ \\ <WRAP box>{{ :laserengraver:procedures:poweroff:laser_pwr.png |Laser Power Button}}</WRAP>
+  - Turn off the water cooler power switch\\ \\ <WRAP box>{{ :laserengraver:procedures:poweroff:chiller_pwr.png |Water Cooler Power Button}}</WRAP>
+  - Turn off the air pump power switch on the side of the machine\\ \\ <WRAP box>{{ :laserengraver:procedures:poweroff:airpump_pwr.png |Air Pump Power Button}}</WRAP>
+  - Turn off the controller power switch on the side of the machine\\ \\ <WRAP box>{{ :laserengraver:procedures:poweroff:controller_pwr.png |Controller Power Button}}</WRAP>
+  - Turn off the outlet strip behind the machine\\ \\ <WRAP box>{{ :laserengraver:procedures:poweroff:pwr_strip.png |Power Strip}}</WRAP>
+  - Remove the key from the machine and return it to the cabinet