3dprinter:procedures:rundesign
Differences
This shows you the differences between two versions of the page.
| 3dprinter:procedures:rundesign [2022/10/11 20:36] – created jstruebel | 3dprinter:procedures:rundesign [2022/10/20 19:53] (current) – external edit 127.0.0.1 | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | ====== Procedure ====== | ||
| + | Follow the steps below to run the 3D printer to create your design | ||
| + | |||
| + | - Insert the SD Card with your design gcode in the slot on the front of the 3D printer | ||
| + | - Press the knob on the front of the display | ||
| + | - Turn the knob to the right to scroll down to the Print from Media entry and press the knob | ||
| + | - Turn the knob to the right to scroll down to the gcode file entry you want to print and press the knob | ||
| + | - Turn the knob to the right to select the Print option and press the knob | ||
| + | - Monitor the machine for any errors or defects while you wait for it to finish your design | ||
| + | - If something happens and you need to stop the print press the knob on the front of the display | ||
| + | - Turn the knob to the right to scroll down to the Stop Print entry and press the knob | ||
| + | - Turn the knob to the right to select the Stop option and press the knob | ||
| + | - Lower the bed to make it easier to remove your design | ||
| + | - Press the knob on the front of the display | ||
| + | - Turn the knob to the right to scroll down to the Motion entry and press the knob | ||
| + | - Turn the knob to the right to scroll down to the Move Axis entry and press the knob | ||
| + | - Turn the knob to the right to scroll down to the Move Z entry and press the knob | ||
| + | - Turn the knob to the right to scroll down to the Move 10mm entry and press the knob | ||
| + | - Turn the knob to the right to change the value to be either at least +100 or 50 greater than the current value and press the knob | ||
| + | - Turn the knob to the left to scroll up to Move Axis entry and press the knob | ||
| + | - Turn the knob to the left to scroll up to the Motion entry and press the knob | ||
| + | - Turn the knob to the left to scroll up to the Main entry and press the knob | ||
| + | - Turn the knob to the left to scroll up to the Info Screen entry and press the knob | ||
| + | - Wait for the bed to stop moving down | ||
| + | - Remove the magnetic sheet from the bed and flex it to release your design | ||
| + | - Replace the magnetic sheet on the bed | ||
| + | - Throw away the extra pieces of plastic that are not part of your design | ||
| + | |||
| + | Once your design has been finished you can either [[: | ||