Procedure

Follow the steps below to turn the laser engraver off

  1. Verify that the key on the laser engraver is in the Off position

    Key in Off Position

  2. Turn off the laser power switch on the side of the machine

    Laser Power Button

  3. Turn off the water cooler power switch

    Water Cooler Power Button

  4. Turn off the air pump power switch on the side of the machine

    Air Pump Power Button

  5. Turn off the controller power switch on the side of the machine

    Controller Power Button

  6. Turn off the outlet strip behind the machine

    Power Strip

  7. Remove the key from the machine and return it to the cabinet
"For we are his workmanship, created in Christ Jesus for good works, which God prepared beforehand, that we should walk in them. - Ephesians 2:10"