Robot Club

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== 3D Printer ======

3D Printers allow you to create your own designs out of different types of plastic. The 3D printer melts the plastic and extrudes it out in layers to build up your design. The plastic comes as filament wrapped on spools and can be any color you want, even glow-in-the-dark.

The 3D printers have the following specifications

  * Build Volume: 220mm x 220mm x 300mm
  * Printer Type: FDM
  * Extruder Type: Bowden
  * Printer Model: Ender 5 Pro

====== Rules ======

Below are the rules that must be followed for safe operation of the 3D printers

  - The machine must have someone monitoring it whenever it is operating
  - A [[:3dprinter:procedures:certification|certified operator]] must be present and overseeing the machine whenever it is operating
  - Only [[:3dprinter:materials|approved materials]] may be used in the machine
  - Always [[:3dprinter:procedures:poweroff|turn off]] the 3D printer machines before leaving

====== Procedures ======

[[:3dprinter:procedures:finddesign|How to Find a Design]]

[[:3dprinter:procedures:slicer|How to Slice a Design]]

[[:3dprinter:procedures:poweron|How to Turn on the Machine]]

[[:3dprinter:procedures:rundesign|How to Run the Machine]]

[[:3dprinter:procedures:poweroff|How to Turn off the Machine]]

[[:3dprinter:procedures:changefilament|How to Change the Filament]]

[[:3dprinter:procedures:levelbed|How to Level the Bed]]

[[:3dprinter:procedures:calibrate|How to Calibrate the Printer]]

[[:3dprinter:procedures:certification|How to become a Certified Operator]]

====== Settings ======

[[:3dprinter:settings:3dprinters|3D Printers]]

====== Projects ======

[[:3dprinter:projects:keychain|Keychain]]

[[:3dprinter:projects:vase|Flower Vase]]

[[:3dprinter:projects:nativity|Christmas Nativity]]